Browse our exclusive Italian upholstery leather hides

Pick Your Leather

Sedona



Sedona is a semi-aniline leather stained with a natural two-toned finish. Featuring a fine pebble grain texture this leather feels soft and supple. Durability is enhanced with the application of a light transparent protective coat. Express a warm and natural decor with this premium leather.

Finish Type: Protected - Semi-Aniline | Country Finished: Italy | Size: 53 sq ft +/- | Thickness: 0.9-1.1 mm | Usage: Home Furnishings, Contract and Hospitality


Sedona Aqua
Aqua
Sedona Bamboo
Bamboo
Sedona Bayou
Bayou
Sedona Black
Black
Sedona Cashew
Cashew
Sedona Cream
Cream
Sedona Dove
Dove
Sedona Garden
Garden
Sedona Ivory
Ivory
Sedona Molasses
Molasses
Sedona Orange
Orange
Sedona Pinto
Pinto
Sedona Pomegranate
Pomegranate
Sedona Titanium
Titanium

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen
Grey Scale = 3 on Reference Blue Wool #5
EN ISO 15700
COLOR FASTNESS TO WATER SPOTTING
Grey Scale ≥ 3 (No permanent swelling)
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
80 Cycles ≥ 3.5
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
500 Cycles Dry ≥ 4
250 Cycles Wet ≥ 3.5
EN ISO 11644
FINISH ADHESION
3 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa
% Elongation ≤ 80%
EN ISO 5402
FLEXING ENDURANCE (FLEXOMETER METHOD)
50,000 Cycles (no finish damage cracks)
EN ISO 17233
COLD CRACK RESISTANCE OF FINISH
-15°C (no finish cracks)
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
>20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
Class 1
FMVSS 302
TBA

Palette



Palette is the "go to leather". It's aniline dyed and has a protective finish to give Palette a smooth, consistent graining and color. Its suppleness is perfect for residential use yet it's unique and durable finish will pass the strictest commercial code. This is the largest collection for Leathera.

Finish Type: Protected - Semi-Aniline | Country Finished: Italy | Size: 53 sq ft +/- | Thickness: 0.9-1.1 mm | Usage: Home Furnishings, Contract and Hospitality


Palette Avocado
Avocado
Palette Baby Camel
Baby Camel
Palette Bamboo
Bamboo
Palette Bayou
Bayou
Palette Black
Black
Palette Charcoal
Charcoal
Palette Chocolate
Chocolate
Palette Coal
Coal
Palette Cream
Cream
Palette Dove
Dove
Palette Espresso
Espresso
Palette Fire Engine Red
Fire Engine Red
Palette Fuchsia
Fuchsia
Palette Grey
Grey
Palette Harness Brown
Harness Brown
Palette Hazelnut
Hazelnut
Palette Henna
Henna
Palette Iolite
Iolite
Palette Iris
Iris
Palette Ivory
Ivory
Palette Khaki
Khaki
Palette Mango
Mango
Palette Mist Blue
Mist Blue
Palette Mocha
Mocha
Palette Navy
Navy
Palette Ocean
Ocean
Palette Oxblood
Oxblood
Palette Pebble
Pebble
Palette Plum
Plum
Palette Saddle
Saddle
Palette Sandstone
Sandstone
Palette Smoke Grey
Smoke Grey
Palette √
Star
Palette Stone
Stone
Palette Taupe
Taupe
Palette White
White
Palette Wine
Wine

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen
Grey Scale = 3 on Reference Blue Wool #5
EN ISO 15700
COLOR FASTNESS TO WATER SPOTTING
Grey Scale ≥ 3 (No permanent swelling)
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
80 Cycles ≥ 3.5
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
500 Cycles Dry ≥ 4
250 Cycles Wet ≥ 3.5
EN ISO 11644
FINISH ADHESION
3 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa
% Elongation ≤ 80%
EN ISO 5402
FLEXING ENDURANCE (FLEXOMETER METHOD)
50,000 Cycles (no finish damage cracks)
EN ISO 17233
COLD CRACK RESISTANCE OF FINISH
-15°C (no finish cracks)
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
>20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
Class 1
FMVSS 302
Complies

Concerto



Concerto is a waxed pull-up leather with a subtle vintage and distressed effect. The elegant crackle and aged surface add character while the colors in this collection bring richness and warmth. Concerto is sealed for added durability. Make an impression on your clients or guests with this sophisticated choice.

Finish Type: Aniline - Wax Pull-Up | Country Finished: Italy | Size: 48 sq ft +/- | Thickness: 1.2-1.4MM | Usage: Home Furnishings, Luxury Interiors


Concerto Chocolate
Chocolate
Concerto Dark Brown
Dark Brown
Concerto Mushroom
Mushroom
Concerto Oatmeal
Oatmeal
Concerto Saddle
Saddle
Concerto Smoke
Smoke
Concerto Whiskey
Whiskey

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen
Grey Scale = 3 on Reference Blue Wool #4
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
20 Cycles ≥ 3
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
50 Cycles Dry ≥ 3
20 Cycles Wet ≥ 3
EN ISO 11644
FINISH ADHESION
2 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa
% Elongation ≤ 80%
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
> 20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
Class 1
FMVSS 302
TBA
   

Brighton



Brighton is fine Italian, aniline dyed leather with a soft and supple hand. It is stained with a combination of subtle oils and dyes, followed by a protective topcoat to give it excellent wear ability. The fine graining adds to its beauty and gives it a warm, cozy appeal. The colors are earthy reminiscent of a fine pair of worn chaps

Finish Type: Protected - Semi-Aniline | Country Finished: Italy | Size: 55 sq ft +/- | Thickness: 1.2-1.4MM | Usage: Home Furnishings, Luxury Interiors


Brighton Bayou
Bayou
Brighton Black Bean
Black Bean
Brighton Cashmere
Cashmere
Brighton Cognac
Cognac
Brighton Grey
Grey
Brighton Ivory
Ivory
Brighton Merenda
Merenda
Brighton Olive
Olive
Brighton Reddish Brown
Reddish Brown
Brighton Saddle
Saddle
Brighton Smoke
Smoke
Brighton Smooth Pebble
Smooth Pebble
Brighton Spruce
Spruce
Brighton Stone
Stone
Brighton Taupe
Taupe

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen
Grey Scale = 3 on Reference Blue Wool #5
EN ISO 15700
COLOR FASTNESS TO WATER SPOTTING
Grey Scale ≥ 3 (No permanent swelling)
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
80 Cycles ≥ 3.5
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
500 Cycles Dry ≥ 4
250 Cycles Wet ≥ 3.5
EN ISO 11644
FINISH ADHESION
3 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa
% Elongation ≤ 80%
EN ISO 5402
FLEXING ENDURANCE (FLEXOMETER METHOD)
50,000 Cycles (no finish damage cracks)
EN ISO 17233
COLD CRACK RESISTANCE OF FINISH
-15°C (no finish cracks)
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
> 20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
Class 1
FMVSS 302
TBA
   

Rustica



Rustica is an aniline dyed leather that is oiled or waxed for a soft, sophisticated, distressed appearance. When pulled, the oils or waxes cause the coloring to migrate and become lighter in the pulled areas; a look associated with fine, authentically aged furniture. A protective clear coat is applied to give Rustica an additional luster and great wear ability.

Finish Type: Aniline - Wax Pull-Up | Country Finished: Italy | Size: 55 sq ft +/- | Thickness: 1.1-1.3MM | Usage: Home Furnishings, Contract and Hospitality, Luxury Interiors


Rustica Baby Blue
Baby Blue
Rustica Bayou
Bayou
Rustica Black
Black
Rustica Bordo
Bordo
Rustica Cemento
Cemento
Rustica Charcoal
Charcoal
Rustica Chocolate
Chocolate
Rustica Forest
Forest
Rustica Grey
Grey
Rustica Indigo
Indigo
Rustica Ivory
Ivory
Rustica Lacquer Red
Lacquer Red
Rustica Lt Moss
Lt Moss
Rustica Mustard
Mustard
Rustica Nova
Nova
Rustica Olive
Olive
Rustica Ranch
Ranch
Rustica Sand
Sand
Rustica Sella
Sella
Rustica Teal
Teal

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen
Grey Scale = 3 on Reference Blue Wool #4
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
20 Cycles ≥ 3
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
50 Cycles Dry ≥ 3
20 Cycles Wet ≥ 3
EN ISO 11644
FINISH ADHESION
2 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa
% Elongation ≤ 80%
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
>20 N Minimum
   
flame resistance
CA TB 117 - 2013 TBA
NFPA - 260 CIGARETTE IGNITION TBA

Luxor



Luxor features a wide-ranging color palette and is one of Leathera's largest collections. American dairy cows are meticulously selected for this article to give it a natural, even, pebbled grain, and to maximize its natural hand. Luxor has excellent wear ability and added durability, due to the high performance characteristics added during the finishing process. We highly recommend this leather for use in the contract, hospitality, and residential markets. Once upholstered, Luxor will give any piece of furniture a luxurious look at a very affordable price.

Finish Type: Protected - Aniline | Country Finished: Italy | Size: 58 sq ft +/- | Thickness: 1.2-1.4MM | Usage: Home Furnishings, Contract and Hospitality, Luxury Interiors


Luxor Aubergine
Aubergine
Luxor Bamboo
Bamboo
Luxor Bayou
Bayou
Luxor Black
Black
Luxor Brandy
Brandy
Luxor Canyon
Canyon
Luxor Chestnut
Chestnut
Luxor Chocolate
Chocolate
Luxor Coal
Coal
Luxor Cream
Cream
Luxor Dark Brown
Dark Brown
Luxor Espresso
Espresso
Luxor Graphite
Graphite
Luxor Ivory
Ivory
Luxor Merlot
Merlot
Luxor Navy
Navy
Luxor Ocean
Ocean
Luxor Olive
Olive
Luxor Paprika
Paprika
Luxor Pewter
Pewter
Luxor Praline
Praline
Luxor Riverstone
Riverstone
Luxor Saddle
Saddle
Luxor Silver
Silver
Luxor Spruce
Spruce
Luxor Taupe
Taupe
Luxor Turquoise
Turquoise
Luxor White
White

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen
Grey Scale = 3 on Reference Blue Wool #5
EN ISO 15700
COLOR FASTNESS TO WATER SPOTTING
Grey Scale ≥ 3 (No permanent swelling)
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
80 Cycles ≥ 3.5
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
500 Cycles Dry ≥ 4
250 Cycles Wet ≥ 3.5
EN ISO 11644
FINISH ADHESION
3 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa
% Elongation ≤ 80%
EN ISO 5402
FLEXING ENDURANCE (FLEXOMETER METHOD)
50,000 Cycles (no finish damage cracks)
EN ISO 17233
COLD CRACK RESISTANCE OF FINISH
-15°C (no finish cracks)
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
>20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
Class 1
FMVSS 302
Complies

Harmony



Harmony has a very warm hand and transparent look giving it an elegant, rustic feel. The best steer hides are selected for this article and then hot ironed to bring up to the surface the oils and waxes used. When upholstered Harmony will change in appearance, and hence give the piece a unique, aged look. Harmony has a protective clear coat that provides additional protection for wear ability. The color ways are warm and luxuriant.

Finish Type: Aniline - Wax Pull-Up | Country Finished: Italy | Size: 52-55 sq ft +/- | Thickness: 1.2-1.4MM | Usage: Home Furnishings, Contract and Hospitality, Luxury Interiors


Harmony Brandy
Brandy
Harmony Chestnut
Chestnut
Harmony Cocoa
Cocoa
Harmony Coffee
Coffee
Harmony Gun Metal
Gun Metal
Harmony Mushroom
Mushroom
Harmony Smoke
Smoke

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen
Grey Scale = 3 on Reference Blue Wool #4
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
20 Cycles ≥ 3
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
50 Cycles Dry ≥ 3
20 Cycles Wet ≥ 3
EN ISO 11644
FINISH ADHESION
2 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa
% Elongation ≤ 80%
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
>20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
TBA
FMVSS 302
TBA

Pearl



Pearl is natural aniline dyed leather with a subtle metallic finish. It has a uniform grain creating a very supple, luxurious hand. What sets Peal apart is how different lighting can change its luster and makes a glamorous backdrop for many interiors projects. It's perfect for both residential and commercial applications that call for a sophisticated style.

Finish Type: Protected - Semi-Aniline | Country Finished: Italy | Size: 55 sq ft +/- | Thickness: 1.2-1.4MM | Usage: Home Furnishings, Contract and Hospitality, Luxury Interiors


Pearl Charcoal
Charcoal
Pearl Chocolate
Chocolate
Pearl Cracked Pepper
Cracked Pepper
Pearl Cream
Cream
Pearl Dark Brown
Dark Brown
Pearl Gold
Gold
Pearl Mist Blue
Mist Blue
Pearl Mushroom
Mushroom

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen
Grey Scale = 3 on Reference Blue Wool #5
EN ISO 15700
COLOR FASTNESS TO WATER SPOTTING
Grey Scale ≥ 3 (No permanent swelling)
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
80 Cycles ≥ 3.5
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
500 Cycles Dry ≥ 4
250 Cycles Wet ≥ 3.5
EN ISO 11644
FINISH ADHESION
3 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa
% Elongation ≤ 80%
EN ISO 5402
FLEXING ENDURANCE (FLEXOMETER METHOD)
50,000 Cycles (no finish damage cracks)
EN ISO 17233
COLD CRACK RESISTANCE OF FINISH
-15°C (no finish cracks)
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
>20 N Minimum
   
flame resistance
CA TB 117 - 2013 Complies
NFPA - 260 CIGARETTE IGNITION Class 1
FMVSS 302 TBA

Vitanza



Vitanza is full aniline, hand antiqued leather which provides any piece with a sophisticated yet oh so comfortable look. Vitanza has been hand stained with a combination of subtle oils and waxes, followed by a protective topcoat to give it excellent wear ability. It is then hot ironed to give it an added finish and a see through look reminiscent of the old English Bridle leathers. Once upholstered, the beauty and workmanship of this leather is amplified and brought to life.

Finish Type: Aniline - Wax Pull-Up | Country Finished: Italy | Size: 53 sq ft +/- | Thickness: 1.2-1.4MM | Usage: Home Furnishings, Contract and Hospitality, Luxury Interiors


Vitanza Black
Black
Vitanza Caramel
Caramel
Vitanza Chivas
Chivas
Vitanza Chocolate
Chocolate
Vitanza Cinnamon
Cinnamon
Vitanza Citron
Citron
Vitanza Deep Sea
Deep Sea
Vitanza Gun Metal
Gun Metal
Vitanza Harness Brown
Harness Brown
Vitanza Midnight
Midnight
Vitanza Peacock
Peacock
Vitanza Sage
Sage
Vitanza Sand
Sand
Vitanza Smoke
Smoke
Vitanza Spice
Spice
Vitanza Walnut
Walnut
Vitanza Whiskey
Whiskey

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen
Grey Scale = 3 on Reference Blue Wool #5
EN ISO 15700
COLOR FASTNESS TO WATER SPOTTING
Grey Scale ≥ 3 (No permanent swelling)
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
80 Cycles ≥ 3.5
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
500 Cycles Dry ≥ 4
250 Cycles Wet ≥ 3.5
EN ISO 11644
FINISH ADHESION
3 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa
% Elongation ≤ 80%
EN ISO 5402
FLEXING ENDURANCE (FLEXOMETER METHOD)
50,000 Cycles (no finish damage cracks)
EN ISO 17233
COLD CRACK RESISTANCE OF FINISH
-15°C (no finish cracks)
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
>20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
Class 1
FMVSS 302
TBA

Milano



Milano uses age old techniques in finishing and is embossed with an Alligator pattern. The leather is mostly finished by hand, to give it a multi-tonal effect and coloration. Finally it is topped off with a natural paraffin finish to give it luster and higher durability. Due to the handcrafted characteristics of this product, colors and patterns will vary from hide to hide.

Finish Type: Aniline - Embossed | Country Finished: Italy | Size: 48-50 sq ft +/- | Thickness: 0.9-1.1MM | Usage: Home Furnishings, Contract and Hospitality, Luxury Interiors


Milano Black
Black
Milano Chocolate
Chocolate

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen
Grey Scale = 3 on Reference Blue Wool #5
EN ISO 15700
COLOR FASTNESS TO WATER SPOTTING
Grey Scale ≥ 3 (No permanent swelling)
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
80 Cycles ≥ 3.5
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
500 Cycles Dry ≥ 4
250 Cycles Wet ≥ 3.5
EN ISO 11644
FINISH ADHESION
3 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa
% Elongation ≤ 80%
EN ISO 5402
FLEXING ENDURANCE (FLEXOMETER METHOD)
50,000 Cycles (no finish damage cracks)
EN ISO 17233
COLD CRACK RESISTANCE OF FINISH
-15°C (no finish cracks)
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
>20 N Minimum
   
flame resistance
CA TB 117 - 2013
TBA
NFPA - 260 CIGARETTE IGNITION
TBA

Bronco



Bronco gives an elegant rustic look with a very warm hand and transparent finish. Fresh Steer Hides are selected for this article, in order to provide an excellent aged look. Bronco has been hot ironed to bring up to the surface the oils and waxes used. When upholstered Bronco will change appearance, and hence give the piece a unique aged look. Bronco has a protective clear coat that provides additional protection for wear ability.

Finish Type: Aniline - Wax Pull-Up | Country Finished: Italy | Size: 55 sq ft +/- | Thickness: 1.2-1.4MM | Usage: Home Furnishings, Contract and Hospitality, Luxury Interiors


Bronco Coffee
Coffee

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen
Grey Scale = 3 on Reference Blue Wool #4
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
20 Cycles ≥ 3
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
50 Cycles Dry ≥ 3
20 Cycles Wet ≥ 3
EN ISO 11644
FINISH ADHESION
2 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa
% Elongation ≤ 80%
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
>20 N Minimum
   
flame resistance
CA TB 117 - 2013 TBA
NFPA - 260 CIGARETTE IGNITION TBA

Aniline



Aniline is a pure aniline full grain leather that embodies a sleek and distinctive wax finish. The tannery vacuum dries the European hides to achieve a smooth and subtle grain. This process leaves the hides with the most natural characteristics beautifully visible to patina overtime. Pure aniline leathers are subject to mild color variations thus giving each lot a unique one of a kind look.

Finish Type: Pure Aniline | Country Finished: Italy | Size: 55 sq ft +/- | Thickness: 0.9-1.1MM | Usage: Home Furnishings, Contract and Hospitality, Luxury Interiors


Aniline Bayou
Bayou
Aniline Charcoal
Charcoal
Aniline Coal
Coal
Aniline Mustard
Mustard
Aniline Ocean
Ocean
Aniline Sand
Sand

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen Grey Scale = 3 on Reference Blue Wool #4
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
20 Cycles ≥ 3
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
50 Cycles Dry ≥ 3 20 Cycles Wet ≥ 3
EN ISO 11644
FINISH ADHESION
2 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa % Elongation ≤ 80%
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
>20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
Class 1
FMVSS 302
TBA
   

Pebble



Pebble is fine Italian, aniline dyed leather with a soft and supple hand. It is stained with a combination of subtle oils and dyes, followed by a protective topcoat to give it excellent wear ability. The fine graining adds to its beauty and gives it a warm, cozy appeal. Please note, the hides used to make this leather are of South American origin. They will have a large hump hole on the head area as well as multiple brands.

Finish Type: Protected - Aniline | Country Finished: Italy | Size: 50-52 sq ft +/- | Thickness: 0.9-1.1MM | Usage: Home Furnishings, Contract and Hospitality, Luxury Interiors


Pebble Black
Black
Pebble Grey
Grey
Pebble Iron
Iron
Pebble Marmot
Marmot
Pebble Steel
Steel

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen Grey Scale = 3 on Reference Blue Wool #5
EN ISO 15700
COLOR FASTNESS TO WATER SPOTTING
Grey Scale ≥ 3 (No permanent swelling)
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
80 Cycles ≥ 3.5
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
500 Cycles Dry ≥ 4 250 Cycles Wet ≥ 3.5
EN ISO 11644
FINISH ADHESION
3 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa % Elongation ≤ 80%
EN ISO 5402
FLEXING ENDURANCE (FLEXOMETER METHOD)
50,000 Cycles (no finish damage cracks)
EN ISO 17233
COLD CRACK RESISTANCE OF FINISH
-15°C (no finish cracks)
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
>20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
Class 1
FMVSS 302
Complies
   

Apache



Apache just asks you to sit in any club chair and think of days gone past in a smoky, Art Deco club with a sherry in hand. Its unique distressed appearance is only enhanced by hand sanding after the aniline dying and protective waxes are used. It's perfect for that 'loungy' look and it's very natural colorations can't be beat.Each hide will show variance in both color and texture, giving each a distinct one of a kind quality.

Finish Type: Nubuck - Aniline | Country Finished: Italy | Size: 55 sq ft +/- | Thickness: 1.1-1.2MM | Usage: Home Furnishings, Contract and Hospitality, Luxury Interiors


Apache Chestnut
Chestnut
Apache Chocolate
Chocolate
Apache Cigar
Cigar
Apache Grey
Grey
Apache Ivory
Ivory
Apache Silver
Silver

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen
Grey Scale = 3 on Reference Blue Wool #4
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
20 Cycles ≥ 3
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
50 Cycles Dry ≥ 3
20 Cycles Wet ≥ 3
EN ISO 11644
FINISH ADHESION
2 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa
% Elongation ≤ 80%
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
> 20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
Class 1
   

Supple



Supple is aniline dyed, has a protective finish, and is topped off with a grain assist to give it a consistent even pebble grain and color. Its suppleness is perfect for residential use yet it's unique and durable finish will pass the strictest commercial code.

Finish Type: Protected - Aniline | Country Finished: Italy | Size: 50 sq ft +/- | Thickness: 1.1-1.3MM | Usage: Home Furnishings, Contract and Hospitality, Luxury Interiors


Supple Antique
Antique
Supple Bark
Bark
Supple Black
Black
Supple Chestnut
Chestnut
Supple Granite
Granite
Supple Henna
Henna
Supple Ivory
Ivory
Supple Java
Java
Supple Khaki
Khaki
Supple Light Grey
Light Grey

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen Grey Scale = 3 on Reference Blue Wool #5
EN ISO 15700
COLOR FASTNESS TO WATER SPOTTING
Grey Scale ≥ 3 (No permanent swelling)
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
80 Cycles ≥ 3.5
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
250 Cycles Wet ≥ 3.5
EN ISO 11644
FINISH ADHESION
3 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa % Elongation ≤ 80%
EN ISO 5402
FLEXING ENDURANCE (FLEXOMETER METHOD)
50,000 Cycles (no finish damage cracks)
EN ISO 17233
COLD CRACK RESISTANCE OF FINISH
-15°C (no finish cracks)
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
>20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
Class 1
FMVSS 302
Complies
   

Natura



Natura is a smooth, pliable leather that you can sink into, letting the soft excellence envelop your senses, organic in all facets. The natural color palette will feature ever-so-slight markings as it beautifully “wears in”, reflective of the test of time that our Italian craftsmanship leathers offer.

Finish Type: Aniline - Wax Pull Up | Country Finished: Italy | Size: 53 sq ft +/- | Thickness: 0.9-1.1MM | Usage: Home Furnishings, Contract and Hospitality, Luxury Interiors


Natura Bayou
Bayou
Natura Black
Black
Natura Charcoal
Charcoal
Natura Espresso
Espresso
Natura Lagoon
Lagoon
Natura Sella
Sella
Natura Smoke
Smoke
Natura Spruce
Spruce
Natura Sweet Pea
Sweet Pea
Natura Taupe
Taupe

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen Grey Scale = 3 on Reference Blue Wool #4"
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
20 Cycles ≥ 3
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
50 Cycles Dry ≥ 3 20 Cycles Wet ≥ 3
EN ISO 11644
FINISH ADHESION
2 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa % Elongation ≤ 80%
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
> 20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
Class 1
FMVSS 302
TBA
   

Nubuck



Nubuck is a incredibly supple nubuck leather tanned in Italy on the finest U.S. Steers and/or European Ox heifers. With a buttery soft touch, when Nubuck is upholstered it’s beautiful colors will change with the nap. The aniline dyes permeate these skins and give it the most natural look a leather can offer.

Finish Type: Aniline - Nubuck | Country Finished: Italy | Size: 55 sq ft +/- | Thickness: 1.1-1.2MM | Usage: Home Furnishings, Contract and Hospitality, Luxury Interiors


Nubuck Caramel
Caramel
Nubuck Charcoal
Charcoal
Nubuck Coffee
Coffee
Nubuck Espresso
Espresso
Nubuck Fern
Fern
Nubuck Navy
Navy
Nubuck Spice
Spice

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen Grey Scale = 3 on Reference Blue Wool #4
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
20 Cycles ≥ 3
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
50 Cycles Dry ≥ 3 20 Cycles Wet ≥ 3
EN ISO 11644
FINISH ADHESION
2 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa % Elongation ≤ 80%
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
>20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
Class 1
FMVSS 302
Complies
   

Villetta



Villetta is protected aniline dyed leather with a soft and supple hand. This leather collection features warm brown tones to enhance the ambiance of any interior. Add a traditional touch to your next project with this fine premium leather choice. Excellent for comfort chairs and couches.

Finish Type: Protected Aniline Country Finished: Italy | Size: 55 sq ft +/- | Thickness: 1.1-1.2MM | Usage: Home Furnishings, Contract and Hospitality, Luxury Interiors


Villetta Brown
Brown
Villetta Camel
Camel
Villetta Gun Metal
Gun Metal
Villetta Stone
Stone

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen Grey Scale = 3 on Reference Blue Wool #4
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
20 Cycles ≥ 3
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
50 Cycles Dry ≥ 3 20 Cycles Wet ≥ 3
EN ISO 11644
FINISH ADHESION
2 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa % Elongation ≤ 80%
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
>20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
Class 1
FMVSS 302
Complies
   

Grano



Grano blends the best of both worlds leather has to offer with a buttery soft hand. Although it’s an aniline looking leather, Grano displays the natural characteristics of Italy’s finest aniline leathers. In addition to the timeless look, this leather offers the highest quality protection in its class.

Finish Type: Protected Aniline Country Finished: Italy | Size: 52 sq ft +/- | Thickness: 0.9-1.1MM | Usage: Home Furnishings, Contract and Hospitality, Luxury Interiors


Grano Chestnut
Chestnut
Grano Cognac
Cognac
Grano Light Taupe
Light Taupe
Grano Smooth Pebble
Smooth Pebble
Grano Stone
Stone

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen
Grey Scale = 3 on Reference Blue Wool #5
EN ISO 15700
COLOR FASTNESS TO WATER SPOTTING
Grey Scale ≥ 3 (No permanent swelling)
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
80 Cycles ≥ 3.5
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
500 Cycles Dry ≥ 4
250 Cycles Wet ≥ 3.5
EN ISO 11644
FINISH ADHESION
3 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa
% Elongation ≤ 80%
EN ISO 5402
FLEXING ENDURANCE (FLEXOMETER METHOD)
50,000 Cycles (no finish damage cracks)
EN ISO 17233
COLD CRACK RESISTANCE OF FINISH
-15°C (no finish cracks)
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
>20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
Class 1
FMVSS 302
Complies
   

Tusk



Tusk is a top grain, aniline dyed leather. Fresh hides are selected for this article, in order to provide an excellent hand and drape. Tusk has a sophisticated aged distressed look due to the waxes and oils applied during the finishing process. When upholstered, Tusk is designed so that it will give any piece an authentic aged look. Tusk has a protective clear coat that provides an elegant luster combined with additional protection for excellent wear ability.

Finish Type: Protected Aniline Country Finished: Italy | Size: 52 sq ft +/- | Thickness: 0.9-1.1MM | Usage: Home Furnishings, Contract and Hospitality, Luxury Interiors


Tusk Grey
Grey
Tusk Oatmeal
Oatmeal
Tusk Saddle
Saddle
Tusk Smoke
Smoke
Tusk Whiskey
Whiskey

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen Grey Scale = 3 on Reference Blue Wool #4
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
80 Cycles ≥ 3
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
500 Cycles Dry ≥ 4 150 Cycles Wet ≥ 3.5
EN ISO 11644
FINISH ADHESION
3 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa % Elongation ≤ 80%
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
>20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
Class 1
FMVSS 302
Complies
   

Plush



Plush is fine Italian, aniline dyed leather with a soft and supple hand. It is stained with a combination of subtle oils and dyes, followed by a protective topcoat to give it excellent wear ability. The fine graining adds to its beauty and gives it a warm, cozy appeal. The colors are earthy reminiscent of a fine pair of worn chaps. Please note, the hides used to make this leather are of South American origin. They will have a large hump hole on the head area as well as multiple brands.

Finish Type: Protected - Aniline Country Finished: Italy | Size: 50-52 sq. ft. | Thickness: 1.2-1.4MM | Usage: Home Furnishings, Contract and Hospitality, Luxury Interiors


Plush Brown
Brown
Plush Burgundy
Burgundy
Plush Cashmere
Cashmere
Plush Chocolate
Chocolate
Plush Grey
Grey
Plush Navy
Navy
Plush Saddle
Saddle
Plush Smoke
Smoke
Plush Smooth Pebble
Smooth Pebble

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen Grey Scale = 3 on Reference Blue Wool #5
EN ISO 15700
COLOR FASTNESS TO WATER SPOTTING
Grey Scale ≥ 3 (No permanent swelling)
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
80 Cycles ≥ 3.5
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
500 Cycles Dry ≥ 4 250 Cycles Wet ≥ 3.5
EN ISO 11644
FINISH ADHESION
3 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa % Elongation ≤ 80%
EN ISO 5402
FLEXING ENDURANCE (FLEXOMETER METHOD)
50,000 Cycles (no finish damage cracks)
EN ISO 17233
COLD CRACK RESISTANCE OF FINISH
(no finish cracks)
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
>20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
Class 1
FMVSS 302
Complies
   

Navajo



Navajo is a full aniline nubuk leather which provides any piece with a sophisticated antique look. It has been hand stained by a combination of subtle dyes, followed by a hand sanding application. This leather is rustic leather, so all markings from Mother Nature are embraced to give it an old cabin look. This leather is just waiting for that comfortable chair or sofa to just be lived in. Each hide will show variance in both color and texture, giving each a distinct one of a kind quality.

Finish Type: Aniline - Nubuck Country Finished: Italy | Size: 55 sq ft +/- | Thickness: 1.3 -1.5MM | Usage: Home Furnishings, Contract and Hospitality, Luxury Interiors


Navajo Cigar
Cigar
Navajo Slate
Slate
Navajo Stone
Stone

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen
Grey Scale = 3 on Reference Blue Wool #4
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
20 Cycles ≥ 3
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
50 Cycles Dry ≥ 3
20 Cycles Wet ≥ 3
EN ISO 11644
FINISH ADHESION
2 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa
% Elongation ≤ 80%
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
>20 N Minimum
   
flame resistance
CA TB 117 - 2013
TBA
NFPA - 260 CIGARETTE IGNITION
TBA
   

Exotico



Exotico is a new twist on a classic ostrich pattern. We’ve added patent tipping to the embossed high points, giving Exotico a glistening sheen and added dimension. With a sophisticated palette, Exotico is highly durable and will offer a beautifully interesting and textural statement to your room.

Finish Type: Aniline - Embossed Country Finished: Italy | Size: 25 sq. ft. +/- (sold in half hides) | Thickness: 1.2-1.4MM | Usage: Home Furnishings, Contract and Hospitality, Luxury Interiors


Exotico Espresso
Espresso
Exotico Ivory
Ivory
Exotico Pewter
Pewter

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen Grey Scale = 3 on Reference Blue Wool #5
EN ISO 15700
COLOR FASTNESS TO WATER SPOTTING
Grey Scale ≥ 3 (No permanent swelling)
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
80 Cycles ≥ 3.5
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
500 Cycles Dry ≥ 4 250 Cycles Wet ≥ 3.5
EN ISO 11644
FINISH ADHESION
3 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa % Elongation ≤ 80%
EN ISO 5402
FLEXING ENDURANCE (FLEXOMETER METHOD)
50,000 Cycles (no finish damage cracks)
EN ISO 17233
COLD CRACK RESISTANCE OF FINISH
-15°C (no finish cracks)
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
>20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
Class 1
FMVSS 302
Complies
   

Nile



Nile's exotic look is a take on the traditional alligator pattern. The scale is slightly larger and bold. Nile uses age old artisan techniques in finishing and is embossed with an alligator pattern. The leather is mostly finished by hand, to give it a multi-tonal effect and coloration. Finally it is topped off with a natural paraffin finish to give it luster and higher durability. Due to the handcrafted characteristics of this product, colors and patterns will vary from hide to hide.

Finish Type: Aniline - Embossed Country Finished: Italy | Size: 23-25 sq. ft. (sold in half hides) | Thickness: 1.2-1.3MM | Usage: Home Furnishings, Contract and Hospitality, Luxury Interiors


Nile Bourbon
Bourbon
Nile Ivory
Ivory
Nile Whiskey
Whiskey

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen
Grey Scale = 3 on Reference Blue Wool #4
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
20 Cycles ≥ 3
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
50 Cycles Dry ≥ 3
20 Cycles Wet ≥ 3
EN ISO 11644
FINISH ADHESION
2 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa
% Elongation ≤ 80%
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
>20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
Class 1
FMVSS 302
TBA
   

Tarea



Tarea is a semi aniline supple cowhide leather. The tannage uses selected raw materials to attain a very soft hand and drape, so that when upholstered the pebbled grain gives the appearance of a natural looking leather. Tarea is excellent for applications in the automotive aftermarket, contract, hospitality, and residential markets, due to its high performance finish. This leather has been finished in a manner to give it an excellent color consistency combined with lasting durability.

Finish Type: Protected - Semi-Aniline Country Finished: Italy | Size: 55 sq. ft. | Thickness: 0.9-1.1MM | Usage: Home Furnishings, Contract and Hospitality, Luxury Interiors


Tarea Black
Black

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen
Grey Scale = 3 on Reference Blue Wool #5
EN ISO 15700
COLOR FASTNESS TO WATER SPOTTING
Grey Scale ≥ 3 (No permanent swelling)
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
80 Cycles ≥ 3.5
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
500 Cycles Dry ≥ 4
250 Cycles Wet ≥ 3.5
EN ISO 11644
FINISH ADHESION
3 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa
% Elongation ≤ 80%
EN ISO 5402
FLEXING ENDURANCE (FLEXOMETER METHOD)
50,000 Cycles (no finish damage cracks)
EN ISO 17233
COLD CRACK RESISTANCE OF FINISH
-15°C (no finish cracks)
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
>20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
Class 1
FMVSS 302
TBA
   

Aviation & Automotive

Amelia



Amelia offers a pleasant pebbly texture with dependable durability perfect for private luxury aircraft and yachts with a soft and subtle palette of beautiful neutral tones. Don’t stop there – its application is limitless! Passing all FAA regulations necessary for private aviation, each hide is flame treated in the drum during the tanning process.

Finish Type: Protected - Aniline | Country Finished: Italy | Size: 55 sq ft +/- | Thickness: 0.9-1.1MM | Usage: Aviation, Yacht & Ship


Amelia Baby Camel
Baby Camel
Amelia Black
Black
Amelia Cream
Cream
Amelia Dove
Dove
Amelia Grey
Grey
Amelia Ivory
Ivory
Amelia Mocha
Mocha
Amelia Sandstone
Sandstone

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen Grey Scale = 3 on Reference Blue Wool #5
EN ISO 15700
COLOR FASTNESS TO WATER SPOTTING
Grey Scale ≥ 3 (No permanent swelling)
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
80 Cycles ≥ 3.5
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
500 Cycles Dry ≥ 4 250 Cycles Wet ≥ 3.5
EN ISO 11644
FINISH ADHESION
3 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa % Elongation ≤ 80%
EN ISO 5402
FLEXING ENDURANCE (FLEXOMETER METHOD)
50,000 Cycles (no finish damage cracks)
EN ISO 17233
COLD CRACK RESISTANCE OF FINISH
-15°C (no finish cracks)
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
> 20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
Class 1
FMVSS 302
Complies
FAR 25.853 (a)
(1)(ii) 12 Seconds
Complies
FAR 25.853 (a).
(1)(ii) 60 Seconds
Complies
   

Aviator



Aviator passes all FAA regulations necessary for private aircraft and developed to meet the stringent codes of the aviation industry. Smooth and sleek, featuring a nice hand with a desirable finish, it will withstand the heaviest wear, making it ideal for private aircraft, yachts, automobiles, restaurants, hotels, offices, and more. Each hide is flame treated in the drum during the tanning process and is in stock and available for immediate shipping.

Finish Type: Protected - Aniline | Country Finished: Italy | Size: 55 sq ft +/- | Thickness: 0.9-1.1MM | Usage: Aviation, Yacht & Ship, Automobiles, Contract & Hospitality


Aviator Baby Camel
Baby Camel
Aviator Black
Black
Aviator Cream
Cream
Aviator Dove
Dove
Aviator Grey
Grey
Aviator Ivory
Ivory
Aviator Mocha
Mocha
Aviator Sandstone
Sandstone

      SPECIFICATIONS

performance characteristics
EN ISO 4045
DETERMINE Ph & Ph (DIFFERENCE FIGURE)
Min 3,2
ISO105/B02
COLOR FASTNESS OF LEATHER TO LIGHT: XENON LAMP
Grey Scale ≥ 3 on specimen Grey Scale = 3 on Reference Blue Wool #5
EN ISO 15700
COLOR FASTNESS TO WATER SPOTTING
Grey Scale ≥ 3 (No permanent swelling)
ISO 11641
COLOR FASTNESS OF LEATHER TO PERSPIRATION
80 Cycles ≥ 3.5
EN ISO 11640
COLOR FASTNESS OF LEATHER TO RUBBING
500 Cycles Dry ≥ 4 250 Cycles Wet ≥ 3.5
EN ISO 11644
FINISH ADHESION
3 N/cm
EN ISO 3376
MEASURE TENSILE STRENGTH AND % ELONGATION
Tensile Strength ≥ 8 Mpa % Elongation ≤ 80%
EN ISO 5402
FLEXING ENDURANCE (FLEXOMETER METHOD)
50,000 Cycles (no finish damage cracks)
EN ISO 17233
COLD CRACK RESISTANCE OF FINISH
-15°C (no finish cracks)
EN ISO 3377-1
TEAR STRENGTH (SINGLE EDGE TEAR)
> 20 N Minimum
   
flame resistance
CA TB 117 - 2013
Complies
NFPA - 260 CIGARETTE IGNITION
Class 1
FMVSS 302
Complies
FAR 25.853 (a)
(1)(ii) 12 Seconds
Complies
FAR 25.853 (a).
(1)(ii) 60 Seconds
Complies
   
Book a Table

Reservations

We accept online bookings for tables up to ten people.
Larger parties can be booked by phone or in person
at the restaurant.

calendar_today
access_time
people
Powered by OpenTable
Food Delivery

Order Online

Select preferred meal from our menu and add to the delivery cart. Login or register and place the order by easy paying online. Once we get the paid order we can deliver your order to your door or you can pick it up at the restaurant.